Abstract
AbstractAn experimental investigation was carried out to examine the fluid dynamic and mass transfer behavior of structured packing, with the liquid and gas phase flowing co‐currently downwards in the column. Liquid to packing mass transfer coefficients for three positions within the pack were measured by an electrochemical method, varying both the liquid and gas loads as well as the physical properties of the liquid phase. Due to the high void fraction of structured packing, much higher liquid flow rates can be used than in traditional particle trickle‐beds. It was found that in the range studied, the gas superficial velocity has no effect on the mass transfer rate and thus, a general mass transfer correlation in terms of liquid Reynolds number only, was developed. Wetted areas and the radial distribution of liquid through the packing element were determined by a colorimetric method. Within the range of liquid flow rates investigated, complete wetting is not achieved, even with the low viscosity solutions. The measured ratios of hydraulic to geometric area, agree reasonably well with values predicted by existing relationships.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
