Abstract
The mass transfer performance of CO2 absorption into blended N,N‐diethylethanolamine (DEEA)/ethanolamine (MEA) solutions was investigated using a lab‐scale absorber (H = 1.28 m, D = 28 mm) packed with Dixon ring random packing. The mass transfer coefficient KGav, the unit volume absorption rate Φ, outlet concentration of CO2 (yCO2), and the bottom temperature Tbot of CO2 in aqueous DEEA/MEA solutions were determined over the feed temperature range of 298.15–323.15 K, lean CO2 loading of 0.15–0.31 mol/mol, over a wide range of liquid flow rate of 3.90–9.75 m3/m2‐h, by using inert gas flow rate of 26.11–39.17 kmol/m2‐h and 6–18 kPa CO2 partial pressure. The results show that liquid feed temperature, lean CO2 loading, liquid flow rate, and CO2 partial pressure had significant effect on those parameters. However, the inert gas flow rate had little effect. To allow the mass transfer data to be really utilized, KGav and yout correlations for the prediction of mass transfer performance were proposed and discussed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3048–3057, 2017
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.