Abstract

Introduction: The prosthetic connection of implants has been related to the loss of marginal bone. The aim of this study was to evaluate bone loss around external connection (EC) and internal conical connection (ICC) implants prior to prosthetic loading. Material and methods: A randomized clinical trial (RCT) was carried out, with a sample size of 93 implants (31 EC and 62 ICC) placed in 27 patients. Radiological controls were performed and stability was measured by resonance frequency analysis (RFA) on the day of placement, at 1 month and at 4 months after the placement. Results: Bone loss in EC implants was not statistically different than in ICC implants between the time of placement (T0) and the subsequent month (T1): (EC = 0.18 mm and ICC = 0.17 mm). Between one month (T1) and four months (T2): (EC = 0.39 mm and ICC = 0.19 mm) this difference was highly significant (p = 0.00). Bone loss between T0 and T2 was significantly lower in the ICC (EC = 0.57 mm and ICC = 0.36 mm), (p = 0.01). The overall success rate of the implants was 97.8%. The stability of the implants increased from 70.69 (T0) to 73.91 (T1) and 75.32 (T2). Conclusions: ICC showed less bone loss up to the time of prosthesis placement. Such bone loss did not have a significant impact on bone stability. Long term RCTs are needed to demonstrate whether this bone loss, which is more pronounced at the beginning in EC, tends to stabilize and equate to ICC.

Highlights

  • The prosthetic connection of implants has been related to the loss of marginal bone

  • We find the conical internal connection (ICC) that can be Morse-taper or false Morse-taper

  • These findings should be taken with caution since there is the possibility that this bone loss, which does seem to be more pronounced during the first year in external connection (EC), tends to stabilize and equate to internal conical connection (ICC)

Read more

Summary

Introduction

The prosthetic connection of implants has been related to the loss of marginal bone. The aim of this study was to evaluate bone loss around external connection (EC) and internal conical connection (ICC) implants prior to prosthetic loading. Conclusions: ICC showed less bone loss up to the time of prosthesis placement. Such bone loss did not have a significant impact on bone stability. Coatings 2020, 10, 1044 surface on top of the implant platform [4] This connection was developed to facilitate the insertion of components such as abutments and impression copings, providing antirotation ability to the abutments [4]. The weakness of this system is attributed to the limited height of the hexagon ( subsequent modifications have been made), which means that when there is a high occlusal load or lateral forces, micro-movements of the abutment occur, which may cause loosening of the retention screw and in some cases their fracture [5,6,7]

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call