Manufacture of stove body using press machine system

Abstract

Listen

Translate article

Press machine control system is required in accordance with the workings of the stove body circuitry to facilitate and accelerate the process of gas stove. Basically the working system of the press machine for the manufacture of stove body is done using a hydraulic system on the manual press machine. Gas stove body construction passes through seven processes with different machines, with different weight. Press machine making gas stove are related to each other in carrying out their respective work processes. The results on the stove maker are still very long sheets. The sheets are cut to a certain size on the press machine. Plates that have been cut into pieces are brought to the press machine to perform the work process and calculated manually. The finished gas stove is packed and labeled. The gas stove wrapping is done manually. The gas stove is inserted into a neatly packed and carton labeled, then ready to be marketed to consumers. This research discusses the working process of press machine. There are seven process of forming gas stove body by using press machine. In the end people will prefer practical products, energy saving, efficient, and good quality with reasonable price. Demand for household appliances, especially gas stoves also increased along with changes in this society. It takes time to complete 1 body of gas stove is 571 seconds : 60 seconds = 9,52 minutes. Goal / hour is the average process time of the person = 571 seconds: 7 = 81,57 seconds /pcs with goal / 60 minute is = 3600 seconds :81,57 seconds /pcs = 44 pcs/hour, goal one day = 44 x 8 hour = 352 pcs. In maintaining the occurrence of damage to the machine daily maintenance is required by following the guidelines of care according to the standards specified.