Abstract
Kenaf (Hibiscus cannabinus L.) core powder was used as a binder to manufacture three-ply plywoods of sugi (Cryptomeria japonica D. Don) by conventional hot pressing under various manufacturing conditions: hot-pressing conditions (pressure, temperature, and time) and powder conditions (grain size, spread volume, and moisture content). The adhesive shear strength and wood failure of plywoods were measured in accordance with the Japanese Agricultural Standard (JAS) for plywood. The result showed that fine kenaf core powder played a role as an effective binder when plywoods were pressed at high pressure, which caused extreme compression of veneer cells. In addition, the adhesive shear strength of plywoods in dry conditions was high regardless of pressing temperature and time, but it was sensitive to pressing temperature and time in wet conditions. The highest adhesive shear strength was obtained from plywoods manufactured with kenaf core powder (grain size 10 μm, spread volume 200 g/m2, moisture content 8.6%) under hot-pressing conditions (pressure 5.0 MPa using distance bars 4 mm thick, temperature 200°C, time 20–30 min). However, the plywood could not meet the requirement for the second grade of plywood by JAS because of its low water-resistance properties.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call