Abstract
The paper focuses on the helicopter main rotor blade FE model. And the main goal is to prove the feasibility of the helicopter main rotor MBD model in calculations of blade deformation as a result of applied aerodynamic forces. FE model is used as a basis for two different computational methods. A mathematical approach in the MBD based on the Craig-Bampton method on the one hand. And finite element model on the other hand. The results of high-frequency blade rotations are obtained. Calculations of these models are compared in order to determine the best method for modeling a linear-elastic blade. By the results, it is necessary to consider the preloaded state of the blade when using the Craig-Bampton method approach. The comparison of blade nodes displacements at various external conditions for both models are given. The influence of rotor MBS model damping parameters on the amplitude of blade oscillations under sinusoidal action is considered.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call