Magnetoelectric behavior and magnetic field-tuned energy storage capacity of SrFe12O19 nanofiber reinforced P(VDF-HFP) composite films

Abstract

• Fabrication of flexible magnetoelectric (ME) P(VDF-HFP)/SrFe 12 O 19 composite films. • Inclusion of SrFe 12 O 19 nanofiber enhances the polar β-phase in P(VDF-HFP) matrix. • P(VDF-HFP)/SrFe 12 O 19 films exhibit enhanced dielectric and ferroelectric properties . • A strong strain mediated ME coupling exists in the P(VDF-HFP)/SrFe 12 O 19 films. • P(VDF-HFP)/SrFe 12 O 19 films' energy storage capacity is tuned by magnetic fields. Flexible, self-standing magnetoelectric (ME) polymer composite films were prepared using the solution casting method by reinforcing one-dimensional ferromagnetic strontium ferrite (SrFe 12 O 19 ) nanofibers, synthesized using the electrospinning method, into poly(vinylidene fluoride–hexafluoropropylene) (P(VDF-HFP)) matrix. The effects of loading of SrFe 12 O 19 nanofibers on the functional, structural, magnetic, dielectric, and ferroelectric properties of P(VDF-HFP) were investigated. The loading enhanced the electroactive β-phase of the films, as confirmed by XRD and FTIR analyses. The ME coupling that existed in the composite films was confirmed by the changes in ferroelectric parameters under various magnetic fields. The energy storage capacity and dielectric constant of the composite films were enhanced with the addition of SrFe 12 O 19 nanofibers, with the maximum values of 56 at 100 Hz and 1678 mJ/cm 3 at 444 kV/cm, respectively, in the composite film with 20 wt% SrFe 12 O 19 nanofibers. The energy storage capacity was further enhanced and tuned by applying an external magnetic field. Thus, this work reports an innovative approach to tuning the energy storage capacity of ME polymer composite films through a magnetic field and also describes use of these films for a wide range of applications, such as energy storage and memory devices and magnetic sensors.