Magnetite nanoparticles supported on organically modified montmorillonite for adsorptive removal of iodide from aqueous solution: Optimization using response surface methodology

Abstract

Magnetite nanoparticles supported on organically modified montmorillonite (MNP-OMMTs) were successfully synthesized by a facile coprecipitation method. The surface of natural clay was modified using a cationic surfactant, hexadecyltrimethylammonium. The synthesized MNP-OMMTs were used as an adsorbent to remove iodide from aqueous solutions. The maximum adsorption capacity of the adsorbent was 322.42mg/g, which is much higher than other previously reported adsorbents for removing iodide in aqueous solution. The experimental data were well fitted to a pseudo-second-order kinetic model, and the adsorption behavior followed the Langmuir isotherm. A thermodynamic study indicated that iodide adsorption was spontaneous and endothermic. The individual and combined effects of key process parameters (pH, temperature, and initial iodide concentration) were studied using a response surface methodology. The maximum iodide removal efficiency of 93.81% was obtained under the optimal conditions of pH3.9, a temperature of 41.3°C, and an initial iodide concentration of 113.8mg/L.