Abstract

It was experimentally established earlier that the increment of the electrode wire melting coefficient at submerged arc welding and surfacing with magnetic fields action (with equal parameters of the welding mode) depends on the chemical composition of the wires. It is suggested that this effect depends on the magnetic properties of the welding materials, i.e. electrode wire and base metal. To measure the magnetic properties of welding materials, a method has been developed in which the magnetic properties of welding materials on samples are investigated. The samples were made in the form of tori, on which the primary and secondary windings were placed. The primary circuit contains an ammeter and a voltmeter, as well as a wattmeter that allows to take into account losses in the sample on hysteresis and Foucault currents, and the secondary circuit contains a voltmeter. Experimental data on the magnetic properties of some welding and surfacing wires, as well as of base metals, are obtained. A simplified method is proposed, in which torus samples are also used, but on which only one winding is placed, over which a direct current is flowed. The value of the increment of the electrode wire melting coefficient at arc welding with the action of magnetic fields increases with increasing their magnetic permeability.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call