Abstract
In this work, a cheap and widely applicable dispersive liquid-liquid microextraction (DLLME) method was developed for the extraction of Ni(II) and Cu(II) from water and food samples and analysis using flame atomic absorption spectrometry. DLLME was assisted by orbital shaker, while ferrofluid as an extractant was based on deep eutectic solvent (DES). This ferrofluid was made of hydrophobic DES (hDES), composed of lauric acid and menthol (molar ratio 1:2), and toner powder@aliquat 336 magnetic particles. The extraction procedure does not require any heating or centrifugation. The method limits of detection value were 0.15 µg L−1 and 0.03 µg L−1 for Ni(II) and Cu(II) respectively along with wide linearity range (0.4–250 µg L−1). The validation of the method was performed using certified reference materials (CRMs). The studies revealed excellent accuracy between results obtained by the developed method and expected values for all CRMs. The relative recoveries of Ni(II) and Cu(II) ions ranged from 92.8% to 98.6%. The developed method was further used for the determination of Ni(II) and Cu(II) in real water and food samples and provided quantitative recoveries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.