Abstract
High permeability ring-shaped mu metal sheets have been used to enhance magnetic fields in the bore of Bi-based high-T c superconducting coils. The central magnetic fieldB 0, generated by pancake coils placed between mu metal sheets, was measured at liquid nitrogen temperature 77 K. The increasing rate (IR) of the central magnetic fieldB 0 for single pancake coils was from 15 to 63% by using a 0.1 mm thick mu metal sheet. IR was decreased when the originalB 0 value increased. The thickness of mu metal sheets also affected IR. It was found that IR increased as the number of mu metal sheets was increased. In a test double-pancake coil IR reached 101%,B 0 was enhanced from 902 to 1815 G, when the total thickness of mu metal sheets on the top and bottom surface of the coil was 2.0 mm. These results indicate that the well-designed high-permeability materials can significantly enhance the magnetic fields generated by high-T c superconducting coils and magnets.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.