Abstract
Insulating ceramics were considered as machinable material with the electrical discharge machining method using the assisting electrode method, which was proposed and advanced by the authors. The mechanical properties changed with the experimental parameters, including the physical characteristics of the workpiece and the tool electrode. In this research, sintered ZrO2-Y2O3 insulating ceramics were subjected to EDM. To investigate the effects of the porous tool electrode material on the removal rate, the porous copper cylinder material was fabricated by PECS (pulse electric current sintering) method. The relative density changed from 60 to 95 wt%. The suitable machining characteristics could be obtained with a relative density of 85% at the positive electrode polarity. The shape of electrodes was transcribed on the workpiece surface more precisely than the solid copper electrode.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
