7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.1117/12.2513232
Copy DOIPublication Date: Mar 20, 2019 |
Citations: 5 |
Detecting and resolving the true on-wafer-hotspot (defect) is critical to improve wafers’ yield in high volume manufacturing semiconductor foundries. Traditionally, Optical Rule Check (ORC) with computation lithography has been one of the most important techniques to flag potential failure patterns (weak points) after Optical Proximity Correction (OPC), where ORC results are fed back to the OPC team to fix the OPC solution if needed, or fed forward to Contamination Free Manufacturing (CFM) team to improve the inspection accuracy. However, as the integrated circuits process becomes more and more complex with the technology scaling, ORC alone could no longer identify the outlier-alike defects, even though it has helped in resolving most of defects on wafer. Failing to detect yield-killer defects could be due to the lack of sufficient understanding and modeling in terms of etching, CMP, as well as other inter-layer process variations. It has been a struggle for Fab to identify reasonable amount of defects scattered on wafer in order to understand defect mechanisms quickly, thus find ways to fix them in a timely manner. In this paper, we present a fast and accurate Defect Detection and Repair Flow (DDRF) with machine learning (ML) methodology to address the above issues. There are four parts in the DDRF: the first part is on the feature generation and data collection, the second on the ML model building, the third on the full-chip prediction, and the fourth on the hot-spot repair. We use limited amount of known defects found on wafer as input to train the ML model, and then apply the ML model to the full chip for prediction. The wafer verification data showed that our flow achieved more than 80% of defect hit rate with engineered feature extractions and ML model for a 7nm mask. Finally, we analyze the failing mechanism with more available defects, and are able to provide guidance to the OPC development to fix the defects by using the ML model.
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.