Abstract
The design and fabrication of phase shifting masks using multi-layer films are summarized. Mask blanks consist of fused silica substrates coated with a top chrome layer, an SiO2 phase layer, and an etch-stop layer. The layer thicknesses are designed to give a (pi) -phase shift at 248 nm (or at 365 nm), and equal and maximal transmission at etched and non-etched regions. The chrome layer is patterned by e-beam resist and is etched by reactive ion etching (RIE) with Cl2 chemistry. The SiO2 layer is patterned by another e-beam resist in registration with first chrome pattern and is etched by RIE with CHF3 chemistry. Two materials were investigated as the etch stop layer, namely Al2O3 and HfO2, with the latter having advantageous properties. It is shown that a 20% processing window is achieved in this type of PSM for a 5 degree phase accuracy as in contrast to quartz etched PSM in which the etched depth and uniformity has to be controlled to within 2.5% for a similar phase accuracy.© (1994) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.