Abstract
Acousto-optic deflectors (AODs) are used for data by-page recording as holograms, and for data extraction from the hologram sampled by the AOD. The possibilities and characteristics of AODs define information capacity of the holographic memory devices as well as architecture and parameters of their separate components. Usually 2 AODs are used for 2-D hologram recording, and 3 AODs -- for volume multiplex recording. The calculations of amount of the recorded holograms which can be provided by different AODs have been carried out in the present work, and the limits of information capacity increasing at expense of optimal using of both AODs and recording media, have been appointed. The specific attention have been paid to the hologram 3-D recording with angular multiplexing where information capacity can be increased by 2 orders. The difficulties to be overcome in order to achieve the biggest information capacity, have been noted. Another subject of study is the problem of the sampled data arbitrary access rate increasing which can be provided by AODs application. It has been noted that minimum access time is limited, and this limitation is connected with the duration of the signal transmission through Bragg cell and with the time of signal transmission and processing in other components of holographic memory. It has been shown that information quality of holographic memory grows along with increasing of the number of used AODs. It has also been noted that if the memory parameters are close to their limits, the cross-talks grow, and the optimum must be found.© (1999) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have