Abstract

The purpose of this study was to determine the differences in the measurable print attributes (Print Contrast and Dot Gain) and color gamut of solvent-based (SB) inks vs. vegetable oil-based (VO) inks of multicolor offset printing. The literature review revealed a lack of published research on this subject. VO inks tend to perform (color reproduction) better than petroleum inks; in recent years many printers have come to prefer using VO inks. This research adopted an experimental research method. The experiment was conducted in a computer to plate (CTP) based workflow. During the printing, once the density values met the standard (GRACoL) ink density values, the press was run continuously without operator interference and 1,000 sheets were printed, from which 278 were randomly selected for colorimetric and densitometric analysis. The color gamuts of both inks were derived by using colorimetric data. The comparison of SB inks to VO inks led to the conclusion that the latter provides a greater color gamut. VO inks offer greater color perception in printed images. The densitometric findings make it difficult to draw conclusions about print contrast, as each of the inks had statistically significant higher levels of print contrast for two of the four ink colors. Further study is needed to control the variables.

Highlights

  • In multicolor offset printing, a paste ink of a given color – yellow, magenta, cyan, and black (CMYK) is transferred from the ink fountain to the series of inking rollers and from there to the image areas of the plate

  • The method by which the continuous tone of a photograph is transformed to a printable image is called halftoning, in which varying percentages of the press sheet are covered with halftone dots to represent the varying tones in the image

  • The purpose of this study is to identify the density, ink trapping, hue error, dot gain, print differences in measurable print attributes (or contrast, grayness, and gray balance (Lustig, characteristics) and color gamuts of SB and vegetable oilbased (VO) 2001)

Read more

Summary

Introduction

A paste ink of a given color – yellow, magenta, cyan, and black (CMYK) is transferred from the ink fountain to the series of inking rollers and from there to the image areas of the plate (image carrier). The method by which the continuous tone of a photograph is transformed to a printable image is called halftoning, in which varying percentages of the press sheet are covered with halftone dots to represent the varying tones in the image. The size or diameter of the dots will vary according to the amounts of light reflected from the tones in the original photograph. The ink printed by each dot, has the same density. The dots of a printed image combine to create an optical illusion of a single-tone image

Objectives
Methods
Findings
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.