Abstract
This paper deals with reference signal tracking control of a quadrotor UAV (Unmanned Aerial Vehicle). Before controller design, a nonlinear simulation model is needed, to be the base of design and the first testbed for the resulted controllers. The next step should be the linearization of the nonlinear model in hovering mode, and the reduction of the resulted linear model. The reduced linear model is controllable and observable. The control goal was to track a spatial trajectory with the helicopter center of gravity. For this purpose, an LQ Servo controller (with double integrator) was designed, augmented with a Kalman filter state observer. The resultant controller provided good tracking performance for a slowly varying reference signal, also on the nonlinear model! After the transient response, the tracking error was below 1 cm which provides safe handling even in indoor applications. The time of transients was approximately 4 seconds which is acceptable.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
