Abstract
Ternary content-addressable memories (TCAMs) may be used to obtain a simple and very fast implementation of a router's forwarding engine. The applicability of TCAMs is, however, limited by their size and high power requirement. Zane et al. proposed a method and associated algorithms to reduce the power needed to search a forwarding table using a TCAM. We improve on both the algorithms proposed by them. Additionally, we show how to couple TCAMs and high-bandwidth SRAMs so as to overcome both the power and size limitations of a pure TCAM forwarding engine. By using one of our novel TCAM-SRAM coupling schemes (M-12 Wb), we are able to reduce TCAM memory by a factor of about 5 on IPv4 data sets and by a factor of about 2.5 on IPv6 data sets; TCAM power requirement is reduced by a factor of about 10 on IPv4 data sets and by a factor of about 6 on IPv6 data sets. These comparisons are with respect to the improved TCAM algorithms we have developed for the strategies of Zane et al. The stated improvements come at the cost of increasing SRAM requirement by a factor 2.5 for IPv4 data and a factor of 5 for IPv6 data. This cost is unimportant given that SRAMs are relatively quite cheap and have much less power requirement. For another of our novel TCAM-SRAM coupling schemes (1-12Wc), the TCAM memory and power reduced by factors of about 4 and 12 for IPv4 data sets, respectively, and by factors of about 2 and 10 for IPv6 data sets. The SRAM required, however, increased by factors of 3 and 7, respectively. These improvements come with no loss in the time (as measured by the number of TCAM searches and SRAM accesses) to do a lookup.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have