Abstract
An energy recovery or resonant clocking scheme is very attractive for saving the clock power in nanoscale ASICs and systems-on-chips, which have increased functionality and die sizes. The technology scaling followed Moore’s law, that lowers node capacitance and supply voltage, making nanoscale integrated circuits more vulnerable to radiation-induced single event upsets (SEUs) or soft errors. In this work, we propose soft-error robust flip-flops (FFs) capable of working with a sinusoidal resonant clock to save the overall chip power. The proposed conditional-pass Quatro (CPQ) FF and true single phase clock energy recovery (TSPCER) FF are based on a unique soft error robust latch, which we refer to as a Quatro latch. The proposed C2-DICE FF is based on a dual interlocked cell (DICE) latch. In addition to the storage cell, each FF consists of a unique input-stage and a two-transistor, two-input output buffer. In each FF with a sinusoidal clock, the transfer unit passes the data to the Quatro and DICE latches. The latches store the data values at two storage nodes and two redundant nodes, the latter enabling recovery from a particle-induced transient with or without multiple-node charge sharing. Post-layout simulations in 65nm CMOS technology show that the FF exhibits as much as 82% lower power-delay product compared to recently reported soft error robust FFs. We implemented 1024 proposed FFs distributed in an H-tree clock network driven by a resonant clock-generator that generates a 1–5 GHz sinusoidal clock signal. The simulation results show a power reduction of 93% on the clock tree and total power saving of up to 74% as compared to the same implementation using the conventional square-wave clocking scheme and FFs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.