Abstract
A low-cost broadband millimetre-wave planar 30×30 array antenna is presented. The antenna is fed by a microstrip feed network in the H-plane to decrease fabrication costs, and a waveguide feed network in the E-plane to reduce the feed line loss. The waveguide and microstrip feed network are coupled through the proposed slot pair. The slots are placed one quarter of a guided-wavelength distance apart, so that the reflected waves from the slots cancel each other. A conductive bar is laid above the slots to increase the coupling, which increases the antenna gain by about 1 dBi. The maximum gain is 30.5 dBi at 41.5 GHz. The measured bandwidth is as broad as 7.1%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
