Low-temperature heat emission combined with seasonal thermal storage and heat pump

Abstract

We studied the application of a stratified seasonal hot water storage tank with a heat pump connected to medium-, low- and very-low-temperature space heat emissions for a single-family house in Stockholm, Sweden. Our aim was to investigate the influence of heat emission design temperature on the efficiency and design parameters of seasonal storage in terms of collector area, the ratio of storage volume to collector area (RVA), and the ratio of height to diameter of storage tank. For this purpose, we developed a mathematical model in MATLAB to predict hourly heat demand in the building, heat loss from the storage tank, solar collector heat production, and heat support by heat pump as a backup system when needed. In total, 108 cases were simulated with RVAs that ranged from 2 to 5(m3m−2), collector areas of 30, 40, and 50(m2), height-to-diameter-of-storage-tank ratios of 1.0, 1.5, and 2.0(mm−1), and various heat emissions with design supply/return temperatures of 35/30 as very-low-, 45/35 as low-, and 55/45(°C) as medium-temperature heat emission. In order to find the best combination based on heat emission, we considered the efficiency of the system in terms of the heat pump work considering coefficient of performance (COP) of the heat pump and solar fraction. Our results showed that, for all types of heat emission a storage-volume-to-collector area ratio of 5m3m−2, with a collector area of 50m2, and a height-to-diameter ratio of 1.0mm−1 were needed in order to provide the maximum efficiency. Results indicated that for very-low-temperature heat emission the heat pump work was less than half of that of the medium-temperature heat emission. This was due to 7% higher solar fraction and 14% higher COP of heat pump connected to very-low-temperature heat emission compared to medium-temperature heat emission.