Abstract

Silicon dioxide films have been deposited at temperatures below 270°C in an electron cyclotron resonance (ECR) plasma reactor from O2, SiH4, and He gas mixture. Pinhole density analysis as a function of substrate temperature for different microwave powers was carried out. Films deposited at higher microwave power and at room temperature show defect densities (<7pinhole∕mm2), ensuring low-temperature process integration on large area. From Fourier transform infrared analysis and thermal desorption spectrometry we also evaluated very low hydrogen content if compared to conventional rf-plasma-enhanced chemical-vapor-deposited (PECVD) SiO2 deposited at 350°C. Electrical properties have been measured in metal-oxide-semiconductor (MOS) capacitors, depositing SiO2 at RT as gate dielectric; breakdown electric fields >10MV∕cm and charge trapping at fields >6MV∕cm have been evaluated. From the study of interface quality in MOS capacitors, we found that even for low annealing temperature (200°C), it is possible to considerably reduce the interface state density down to 5×1011cm−2eV−1. To fully validate the ECR-PECVD silicon dioxide we fabricated polycrystalline silicon thin-film transistors using RT-deposited SiO2 as gate insulator. Different postdeposition thermal treatments have been studied and good device characteristics were obtained even for annealing temperature as low as 200°C.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.