Low temperature destruction of PCDD/Fs by catalysis coupled with activated carbon.

Abstract

In order to enhance the oxidation and adsorption capacity of catalyst, two kinds of activated carbon (AC) are mechanically mixed with V2O5-WO3/TiO2 catalyst respectively. In this study, the mixtures (M-1: catalyst mixing with AC based on lignite; M-2: the one on coconut shell) are investigated to destroy high concentration (9.8 ng I-TEQ Nm(-3)) PCDD/Fs at low temperature (160 °C). Adding AC into the catalyst obviously increases removal efficiency (RE) and destruction efficiency (DE). However, M-2 presents higher RE value and lower DE value compared with M-1 at the same conditions as the stronger adsorption capacity of AC based on coconut shell. For the M-2 mixture, RE values are decreasing while DE values show an opposite trend with the ratios of catalyst to AC increasing. Oxygen plays a positive role on the destruction of PCDD/Fs by accelerating the conversion of V(4+)Ox and V(5+)Ox. Adjusting oxygen content from 0 to 20 % could increase the DE value from 27.4 to 82.2 % for the M-1 and from 15.8 to 68.9 % for the M-2. In the presence of ozone, a dark brown flock will be generated when the ratio of AC and catalyst is 4:1 due to the reaction between AC and ozone, which results in the lower RE and DE values. The RE and DE values reach the maximum of 96.3 %, 90.6 % in this paper, respectively, when the ratio of AC and catalyst is 1:1 with ozone. Finally, the regenerating of mixture is investigated. Most of dioxin residues in the mixture are desorbed and oxidized by catalysis at 200 °C in the presence of oxygen.