Abstract
High-quality silicon dioxide films have been deposited at 130 °C by a sputtering technique using an electron cyclotron resonance microwave plasma. Film properties have been studied as a function of O2 flow rate in the range of 2–8 sccm with a constant Ar flow rate of 8 sccm when other plasma conditions were a microwave power of 700 W, and a radio frequency power of 700 W supplied to a target for sputtering. Dielectric breakdown characteristics have been investigated by ramp current–voltage measurements. Films deposited with an O2 flow rate of 5.3 sccm have a dielectric breakdown field of 10 MV/cm, which is close to that of thermally grown silicon dioxide film. The deposition rate was as high as 23 nm/min. Structural properties of films have also been characterized by ellipsometry and infrared absorption spectroscopy, showing that films with O2 flow rates above 4 sccm have near-stoichiometric composition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.