Abstract
We deposited amorphous Ba0.7Sr0.3TiO3 (BST) on silicon and plastic substrate under 110°C by pulsed laser deposition (PLD) and use it as the dielectric of the organic transistor. Depends on the thickness of BST layer, the highest mobility of the devices can achieve 1.24cm2V−1s−1 and 1.01cm2V−1s−1 on the silicon and polyethylene naphthalate (PEN) substrate, respectively. We also studied the upward and downward bending tests on the transistors and the dielectric thin films. We found that the BST dielectric pentacene transistor can maintain the mobility at 0.5cm2V−1s−1 or higher while the bending radius is around 3mm in both upward and downward bending. Our finding demonstrates the potential application of PLD growth high-k dielectric in the large area organic electronics devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.