Abstract

We report the first measurements of low-frequency noise in high-performance, UHV/CVD epitaxial Si- and SiGe-base bipolar transistors. The magnitude of the noise power spectral density at fixed frequency for both Si and SiGe devices is comparable for similar bias, geometry, and doping conditions, indicating that the use of strained SiGe alloys does not degrade transistor noise performance. The best recorded values of noise corner frequency were 480 Hz and 373 Hz for the Si and SiGe transistors, respectively, for multi-stripe devices with an emitter area of 0.5/spl times/10.0/spl times/3 /spl mu/m/sup 2/. A functional dependence of the noise power spectral density on base current for both device types of I/sub B//sup 1.90/ was observed, and noise measurements as a function of device geometry suggest that the contributing noise sources are uniformly distributed across the emitter of the transistors, not at the emitter periphery.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.