Low dielectric constant polyimide mixtures fabricated by polyimide matrix and polyimide microsphere fillers

Abstract

AbstractPolyimide microspheres were prepared via non‐aqueous emulsion polymerization by using pyromellitic dianhydride (PMDA) as anhydride monomer and 2,2‐bis(4‐(4‐aminophenoxy)phenyl)propane as amine monomer. The polyimide microspheres were well characterized by Fourier transform infrared spectroscopy, SEM and laser particle size analyzer. They were spherical in shape and monodisperse and their size was 31–33 μm. Polyimide mixtures formed by polyimide microspheres as fillers and polyimide composed of pyromellitic and dianhydride 4,4′‐oxydianiline (ODA) as matrix were investigated with regard to thermal properties, dielectric properties and mechanical properties. With 10%–50% polyimide microspheres in the polyimide mixtures, the dielectric constants were 2.26–2.48 (1 MHz) and the loss tangents were 0.00663–0.00857 (1 MHz), which were both significantly lower than the values for ODA‐PMDA polyimide. The decomposition temperature and glass transition temperature were above 440 and 290 °C. The polyimide mixtures possessed excellent thermal resistance. When the percentage of polyimide microsphere addition was 30%, the polyimide mixtures had the largest tensile strength (128.50 MPa) and elongation at break (9.01%). These results indicate that the polyimide microspheres were used as both low dielectric fillers and reinforcing fillers. © 2020 Society of Chemical Industry