Low-cycle fatigue small crack initiation and propagation behaviour of cast magnesium alloys based on in-situ SEM observations

Abstract

In-situ observations on the initiation and propagation behaviour of low-cycle fatigue small cracks in cast magnesium–aluminium alloys (AM50 and AM60B) were carried out with scanning electron microscopy (SEM) to elucidate the resistance to fatigue cracking and to evaluate the fatigue small crack growth rate accurately and quantitatively. The results indicate that the fatigue small cracks formed preferentially on β-phase (Mg17Al12) boundaries at room temperature. In addition, the effects of the parameters of stress levels in low-cycle fatigue and temperatures as well as microstructure on fatigue small crack propagation behaviour are revealed. The variation of crack open displacement (COD) with stress levels and cycles at elevated temperature shows that it is unsuitable to estimate the fatigue small crack growth rate of cast magnesium alloys using conventional measurement methods such as the plastic-replica technique due to the obvious difference between microscopic cracks in the open and closed states. Stabilized crack propagation behaviour is limited to cases where the physical crack length is less than 1 mm in low-cycle fatigue.