Abstract
In this study, low-cycle fatigue test was conducted for a lead-free solder joint at two test temperatures (348K, 398K) and three strain amplitudes (3%, 4%, and 8%). Fatigue failure behavior was analyzed and the fatigue life was evaluated using the Coffin–Manson relationship and Morrow energy-based model. The results show that the maximum load gradually drops with increasing the number of loading cycles. When the strain range or temperature is low, the maximum load drop curve can be divided into three stages. Then, it degrades into a linear stage with increasing the strain range or temperature. Both the softening of solder and the reduction of effective load-bearing area are responsible for the maximum load drop depending on the test condition. Fatigue crack initiates at the corner of the solder joint and propagates along the strain concentrated zone. Spacing distance between fatigue striations is enlarged with increasing the temperature in accordance with the degradation of fatigue resistance. In addition, both the Coffin–Manson model and Morrow energy-based model can be used to evaluate the fatigue life of solder joint under high temperature. The fatigue ductility exponent α in Coffin–Manson model and the fatigue ductility coefficient C in Morrow model are dependent on temperature, whereas other parameters in these two models keep stable under different temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.