Abstract
In many applications, video streams, images, audio streams and scalar data are commonly used. In these fields, one of the most important magnitudes to be collected and controlled is the light intensity in different spots. So, it is extremely important to be able to deploy a network of light sensors which are usually integrated in a more general Wireless Multimedia Sensor Network (WMSN). Light control systems have increasing applications in many places like streets, roads, buildings, theaters, etc. In these situations having a dense grid of sensing spots significantly enhances measuring precision and control performance. When a great number of measuring spots are required, the cost of the sensor becomes a very important concern. In this paper the use of very low cost light sensors is proposed and it is shown how to overcome its limited performance by directionally correcting its results. A correction factor is derived for several lighting conditions. The proposed method is firstly applied to measure light in a single spot. Additionally a prototype of a sensor network is employed to draw the lighting map of a surface. Finally the sensor grid is employed to estimate the position and power of a set of light sources in a certain region of interest (street, building, …). These three applications have shown that using low cost sensors instead of luxmeters is a feasible approach to estimate illuminance levels in a room and to derive light sources maps. The obtained error measuring spots illuminance or estimating lamp emittances are quite acceptable in many practical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have