Abstract

Clay is a low cost and environment-friendly material for construction. On fi ring, it gets hard and attains compressive strength as high as normal concrete. This paper presents the flexural behaviour of singly reinforced baked clay beams under longterm sustained loads. The loads applied at midspan of these beams were 30%, 40%, and 50% of their short-term failure load for a period of 360 days. The results show that therate of defection, formation of cracks, and their stabilization was completed in a certain period of time depending on the intensity of the long-term sustained loads. In the fi rst and second loading conditions, this period of opening and stabilization of cracks was 100 and 77 days, respectively. Then, the defection increased with a decreasing rate. While in the case of 50% of loading condition, the period of formation and stabilization of cracks was reduced to only 50 days, and then these cracks became dormant and no new crack was developed with respect to time. After that, negligible midspan defection was observed with time. In addition to this, the defection in these beams was more compared to the estimated long-term defection according to ACI code.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.