Abstract
In this paper, we consider antiplane deformation for an isotropic elastic material consisting of an infinite system of parallel identical circular cylindrical fibers covered with a uniform cylindrical film uniformly covering the surface of each fiber and a bonding medium weakened by a doubly periodic system of rectilinear cracks. Each washer has a centrally located crack that is less than the diameter of the washer. The presented stresses and their displacements are expressed in terms of an analytical function. For the solution, the well-known position is used that the displacement in the case of an antiplane shear is a harmonic function. A known representation of the solution in each area is applied through the corresponding complex analytical function. Three analytic functions are represented by Laurent series. Satisfying the boundary condition on the contours of holes and crack faces, the problem is reduced to two infinite algebraic systems with respect to the sought coefficients and to two singular integral equations with a Cauchy-type kernel. Then the singular integral equation is reduced to a finite algebraic system of equations by the Multopp – Kalandia method. The procedure for calculating the stress intensity coefficients is given. The numerical implementation of the described method is given at IBM. The results of calculations of the critical load depending on the crack length and elastic geometric parameters of the perforated medium are presented. Keywords: isotropically elastic material, doubly periodic lattice, rectilinear cracks, stress intensity factor, mean stresses, critical load, circular hole, longitudinal shear.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.