Abstract
The long-term stability of silicon-containing diamond-like carbon films was investigated. The samples were prepared by plasma source ion implantation with a mixture of tetramethylsilane (TMS) and acetylene (C2H2) using negative high voltage pulses. The film composition was changed by varying the flow rates of the TMS and C2H2 gases, resulting in a Si content from 0 to 44 at.%. After deposition the films were annealed at temperatures from 523 K to 773 K for 168 h in ambient air. The effect of the Si content on the structure, the mechanical and tribological properties of the DLC films was investigated. A silicon oxide layer is produced on the surface of the film which improves the thermal stability. Mechanical and friction characteristics of the Si-DLC were not much affected by the long-term thermal annealing if the temperature was kept below 573 K.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.