Abstract
Lightning is an electrical discharge during storms that can be monitored continuously from certain distances. It can be either within clouds (intra cloud), or between clouds and the ground (cloud-ground). There are various techniques used nowadays to locate lightning, and to determine various parameters produced from lightning. Each technique provides its own claimed performances. This paper attempts to provide instantaneous detection of lightning strike lightning location using the Time of Arrival (TOA) method of a single detection station (comprises of four antennas). It also models the whole detection system using suitable mathematical equations so as to give some understanding on the differences between the measured and calculated (theoretical) results. The measurement system is based on the application of mathematical and geometrical formulas. Several parameters such as the distance from the radiation source to the station and the lightning path are significant in influencing the accuracy of the results (elevation and azimuth angles). The role of each parameter is examined in detail using Matlab. This study solved the resultant non-linear equations by Newton-Raphson techniques. Methods to determine the radiation source which include the exact coordinate of a given radiation source in 3-dimensions were also developed. Further clarifications on the cause of errors in the single-station TOA method and techniques to reduce the errors are given.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.