Local Cu Component Engineering to Achieve Continuous Carrier Transport for Enhanced Kesterite Solar Cells.

Abstract

Although the traditional Cu-poor architecture addresses many limitations for Cu2ZnSn(S,Se)4 solar cells, its further development still encounters a bottleneck in terms of efficiency, primarily arising from the inferior charge transport within the quasineutral region and enlarged recombination at back contact. On the contrary, the electrical benign kesterite compound with higher Cu content may compensate for these shortages, but it will degrade device performance more pronouncedly at front contact because of the Fermi level pinning and more electric shunts. Based on the electric disparities on their independent side, in this work, we propose a new status of Cu component by exploring a large grain/fine grain/large grain trilayer architecture with higher Cu content near back contact and lower Cu content near front contact. The benefits of this bottom Cu-higher strategy are that it imposes a concentration gradient to drive carrier diffusion toward front contact and decreases the valence band edge offset in the rear of the device to aid in hole extraction. Also, it maintains the Cu-poor architecture at the near surface to facilitate hole quasi-Fermi level splitting. In return, the local Cu component engineering-mediated electric advances contribute to the highest efficiency of 12.54% for kesterite solar cells using amine-thiol solution systems so far.