Load-bearing characteristics of surface conductor in deepwater gas hydrate formations

Abstract

The surface conductor is the first structural casing in deepwater natural gas hydrate (NGH) development, bearing the top load while suspending the casings of various layers. NGH decomposition leads to formation settlement, changing the mechanical properties of the formation and reducing the bearing capacity of the surface conductor, threatening the safety and stability of the wellhead. Understanding the bearing characteristics of the surface conductor in the hydrate formation can guide the safe drilling operation in the field. By introducing the negative skin friction theory of pile foundations and based on conventional bearing capacity models, a method for calculating the bearing capacity of surface conductors in NGH formations was developed. Using an NGH drilling simulation apparatus, the accuracy of the bearing capacity theoretical model was verified, empirical coefficients under different conditions were obtained, and the influence of soil parameters, hydrate saturation, and decomposition temperature on the bearing capacity of surface conductors was quantified. The results indicated that compared to clay, sandy soils have higher porosity and significantly weakened strength after the decomposition of NGH; when the hydrate saturation in the formation is 20%, the reduction in bearing capacity of the surface conductor in sand exceeds 30%, and in clay soils, it decreases by 25% after complete decomposition of NGH; as the hydrate saturation increases, the reduction in the bearing capacity of surface conductors after decomposition becomes more significant. Verified through Experimentation, the error of the hydrate-bearing strata-bearing capacity model is around 10%. For short-term test production operations of NGH in water, the design depth for surface conductors is around 100 meters. These research results can provide a scientific theoretical basis for the design of conductor depth below the mud， and reduce operational risks.