Abstract
This paper presents a unified framework for the modeling, analysis, and design of load-independent Class E and Class EF inverters and rectifiers. These circuits are able to maintain zero-voltage switching and, hence, high efficiency for a wide load range without requiring tuning or use of a feedback loop, and to simultaneously achieve a constant amplitude ac voltage or current in inversion and a constant dc output voltage or current in rectification. As switching frequencies are gradually stepping into the megahertz (MHz) region with the use of wide-bandgap (WBG) devices such as GaN and SiC, switching loss, implementing fast control loops, and current sensing become a challenge, which load-independent operation is able to address, thus allowing exploitation of the high-frequency capability of WBG devices. The traditional Class E and EF topologies are first presented, and the conditions for load-independent operation are derived mathematically; then, a thorough analytical characterization of the circuit performance is carried out in terms of voltage and current stresses and the power-output capability. From this, design contours and tables are presented to enable the rapid implementation of these converters given particular power and load requirements. Three different design examples are used to showcase the capability of these converters in typical MHz power conversion applications using the design equations and methods presented in this paper. The design examples are chosen toward enabling efficient and high-power-density MHz converters for wireless power transfer (WPT) applications and dc/dc conversion. Specifically, a 150-W 13.56-MHz Class EF inverter for WPT, a 150-W 10-MHz miniature Class E boost converter, and a lightweight wirelessly powered drone using a 20-W 13.56-MHz Class E synchronous rectifier have been designed and are presented here.
Highlights
T HE full exploitation of wide-bandgap (WBG) devices is driving the design of ever higher frequency convertersManuscript received November 15, 2017; accepted February 20, 2018
Measurements at load currents below 0.3 A could not be obtained accurately due to the low control bandwidth of the electronic load, which lead to oscillations in the output voltage
The switching signals for the loadindependent Class EF inverter and the Class E rectifier were provided from a function generator with a phase difference of 120◦
Summary
T HE full exploitation of wide-bandgap (WBG) devices is driving the design of ever higher frequency convertersManuscript received November 15, 2017; accepted February 20, 2018. Further work was carried out in [3] and recently in [4] and [5] to extend the concept to Class EF inverters Since it was introduced, the concept of load independence has not seen wide implementation in power conversion and amplification, since the majority of power converters operate at kilohertz frequencies using typical hard-switched topologies that are inherently load independent, and RF amplifiers are normally designed to be matched to a fixed 50-Ω load. The concept of load independence has not seen wide implementation in power conversion and amplification, since the majority of power converters operate at kilohertz frequencies using typical hard-switched topologies that are inherently load independent, and RF amplifiers are normally designed to be matched to a fixed 50-Ω load Emerging technologies such as WPT benefit from operating at MHz switching frequencies and require high power efficiencies [6] across a wide load range. Load-independent Class E/EF converters are ideal candidates for sustaining the required high efficiency, while achieving a regulated output voltage or current
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
