Lithium recovery from brines by lithium membrane flow capacitive deionization (Li-MFCDI) – A proof of concept

Abstract

The demand of lithium for electric vehicles and energy storage devices is increasing rapidly, thus new sources of lithium (such as seawater and natural or industrial brines), as well as sustainable methods for its recovery, will need to be explored/developed soon. This work presents a novel electromembrane process, called Lithium Membrane Flow Capacitive Deionization (Li-MFCDI), which was tested to recover lithium from a synthetic geothermal brine containing a much higher mass concentration of sodium than lithium (more than 650 times). Specifically, a ceramic lithium-selective membrane was integrated into a flow capacitive deionization (FCDI) cell, which was specifically designed, and 3D printed, to allow simultaneous charging and regeneration of the employed flow electrodes. Despite the extremely high Na+/Li+ mass ratio in the feed stream, 99.98% of the sodium was rejected and the process selectivity for lithium over other monovalent cations was 141 ± 5.85 for Li+/Na+ and 46 ± 1.46 for Li+/K+. The Li-MFCDI process exhibited a stable behaviour over a 7-day test period, and the estimated energy consumption was 16.70 ± 1.63 kWh/kg of Li+ recovered in the draw solution. These results demonstrate promising potential of the Li-MFCDI for the sustainable lithium recovery from saline streams.