Abstract
This paper evaluates the limit load, shakedown limit and ratchet limit of the oblique nozzle based on the linear matching method (LMM). In order to study the influencing factors of the limit load, shakedown limit and ratchet limit of the oblique nozzle, oblique nozzle models with different dip angles, diameter-to-thickness ratios of the oblique nozzle and diameter-to-thickness ratios of the main pipe are established, respectively. Firstly, the limit load, shakedown limit and ratchet limit of the oblique nozzle are studied. At the same time, the influence of the loading mode on the shakedown limit and ratchet limit is also studied. Secondly, oblique nozzles with different defect lengths, widths and depths are established, respectively. The influence of loading paths on shakedown limit and ratchet limit of oblique nozzles with defects are also studied. Finally, shakedown limit and ratchet limit diagrams are obtained based on linear matching method. The correctness of shakedown limit and ratchet limit diagrams is validated by ABAQUS incremental elastic-plastic analysis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
