Abstract
Vehicle emissions estimates are needed at high spatial and temporal resolution to estimate near-roadway air quality and human exposures. The MOBILE6 emission factor model is based on transient test cycles of less than 65 mph. Correction factors for high speed and constant speed are developed based on vehicle-specific power-based modal models for light duty gasoline vehicles, using data from portable emission measurement systems. At 80 mph versus 65 mph, the estimated average emission rates are greater by 30%, 20%, 80%, and 10% for NO x , HC, CO, and CO 2. The ratio of constant to average of transient speed emission rates range from 0.49 to 0.94 for NO x at speeds of 20 mph and 80 mph. The high speed and constant speed correction factors are applied to estimate vehicle emissions for a freeway segment that includes vehicle cruising speeds between 65 and 80 mph. The potential error for not accounting for constant speed operation on a short segment of highway could be 49% at moderate speed and 24% at high speed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transportation Research Part D: Transport and Environment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.