Abstract
In the present work, nickel and copper bimetallic nanoparticles with three different concentration ratios of 70:30, 50:50, and 30:70 were synthesized by laser ablation of Ni and Cu in deionized water. The suitability of Ni-Cu bimetallics as nanocatalysts was investigated in the catalytic reduction of pollutant 4-nitrophenol. The nanocatalysts were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible (UV–Vis) spectroscopy. The morphology using SEM and TEM indicated that Cu had an elongated or flake-like structure, whereas Ni had a quasi-spherical structure. XPS investigation has been performed to study the elemental composition and chemical states near-surface regions of the generated Ni-Cu bimetallic nanoparticles. XRD and XPS confirm high oxidation of Cu to CuO with approximately no residual Cu metal. However, the XRD patterns did not show complete Ni oxidation to NiO, confirming the presence of a Ni dopant part in the Ni-Cu samples. The behavior of the photoelectron peaks in the XPS spectra suggested that the Ni-Cu nanocomposites exhibited surface charge transfer. Pulsed laser ablation developed ligand-free Ni-Cu nanoparticles, which affected the structure and catalytic properties. The nanocatalyst for 50:50 of Ni and Cu had the highest rate constant, corresponding to the shortest time required to achieve 100 % conversion/reduction of the pollutant dye. The apparent synergistic effect between Ni and Cu is clearly dictated by the amount of Cu embedded in the nanocomposites, with this becoming a key factor in lowering the band gap energy values. Overall, the surface charge transfer rate can enhance the catalytic performance by tuning the Ni and Cu concentrations.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call