Abstract
In a nuclear fusion reactor, some components of the system are subjected to huge thermal loads. These components, such as grids, neutralizers, calorimeters, ducts, divertors, blankets etc. have to be actively cooled in order to avoid damage, functionality problems and specially to ensure their reliability. The design process of such components requires taking into account several physical phenomena, with the goal of not only satisfying the functionality conditions, but also with a focus on the structural verifications and component lifetime. For assessment of the structural design for components in ITER, the ITER Structural Design Criteria for In-vessel Components (SDC-IC) represent the reference verification criteria.The aim of this work is to investigate the relationship between the cooling system performance and the fatigue life. In this work a generalized framework for the evaluation of cooling system components is presented, taking into account the necessary input parameters, performing numerical analyses, division of component into several interest regions and assessing the fatigue life. The performed numerical analyses are a set of coupled CFD and thermo-structural analyses.A case study is presented for a critical component, the Grounded Grid (GG), inside the SPIDER beam source experiment at Consorzio RFX, Padova, Italy. The presented test case includes cooling system effectiveness analysis, assessment of the temperature distribution on housing during operations, mapping the pressure distribution inside the cooling system and finally assessment of the maximum number of allowed cycles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have