Life-Cycle Production Optimization of the CO2-Water-Alternating-Gas Injection Process Using Least-Squares Support-Vector Regression Proxy

Abstract

SummaryIn this study, we present a framework for efficient estimation of the optimal carbon dioxide (CO2)-water-alternating-gas (WAG) parameters for robust production-optimization problems by replacing a high-fidelity model with a least-squares support-vector regression (LS-SVR) model. We provide insight and information on the proper selection of feature space and training samples of the LS-SVR proxy model for the CO2-WAG life cycle production optimization problem. Given a set of training points generated from high-fidelity model-based simulation results, an LS-SVR-based proxy model is built to approximate a reservoir-simulation model. The estimated optimal design parameters are then found by maximizing net present value (NPV) using the LS-SVR proxy as the forward model within an iterative-sampling-refinement (ISR) optimization algorithm that is designed specifically to promote the accuracy of the proxy model for robust production optimization. As an optimization tool, the sequential quadratic programming (SQP) method is used. CO2-WAG design variables are CO2 injection and water injection rates for each injection well at each cycle, production bottomhole pressure (BHP) for each production well at each WAG half-cycle, and inflow control valve (ICV) for each well at each WAG half-cycle and at each valve. We study different scenarios where we fix some of the design variables to investigate the importance of design variables on the life cycle production optimization of the CO2-WAG problem. We compare the performance of the proposed method using the LS-SVR runs with the popular stochastic simplex approximate gradient (StoSAG) and reservoir simulation runs for a synthetic example considering a three-layer, channelized reservoir with four injectors and nine producers. Results show that with the properly selected feature space and training points, the proposed LS-SVR-based ISR optimization framework is at least 1.5–8 times computationally more efficient, depending on the cases considered, than the StoSAG using a high-fidelity numerical simulator. However, we observe that the size and sampling of the training data, as well as the selection of well controls and their bound constraints for the well controls, seem to be influential on the performance of the LS-SVR-based optimization method. This is the first LS-SVR application to the CO2-WAG optimal well-control problem. The proposed LS-SVR-based ISR optimization framework has the potential to be used as an efficient tool for the CO2-WAG optimization problem.