Leveraging ZnO morphologies in piezoelectric composites for mechanical energy harvesting

Abstract

In this work flexible composite nanogenerators were prepared aiming to identify and optimize the exploitation of the piezoelectric effect in mechanical energy harvesting. A novel shape-controlled synthesis of ZnO microstructures through hydrothermal route was achieved resulting in different morphologies and aspect-ratio particles, microwires, multipods, and desert-roses. The three different microparticles and round-shaped commercial nanoparticles were incorporated into a polydimethylsiloxane matrix and a comparative study on the piezoelectric output power dependence on the filler morphology was carried out. The highest performances, i.e. output voltage of 10V and a maximum power of 55µW, were obtained with the highest aspect-ratio ZnO filler, the microwires, dispersed in the PDMS matrix at a 40wt% concentration. Considering the generated voltage dependence on the size and aspect-ratio of the fillers, a working mechanism was formulated. The nanogenerators were then exploited to charge a homemade carbon-based supercapacitor. The voltage charging curves confirm the voltage generation trend based on the high aspect-ratio particles, showing that the best performances are obtained by the microwires-based composite nanogenerator. This work thus contributes to clarify the piezoelectric mechanism in composite nanogenerators and to maximize the output power generation in view of self-powered nanodevices able to recover and store waste environmental energy.