Abstract

BackgroundRobotic ankle exoskeletons can provide assistance to users and reduce metabolic power during walking. Our research group has investigated the use of proportional myoelectric control for controlling robotic ankle exoskeletons. Previously, these controllers have relied on a constant gain to map user’s muscle activity to actuation control signals. A constant gain may act as a constraint on the user, so we designed a controller that dynamically adapts the gain to the user’s myoelectric amplitude. We hypothesized that an adaptive gain proportional myoelectric controller would reduce metabolic energy expenditure compared to walking with the ankle exoskeleton unpowered because users could choose their preferred control gain.MethodsWe tested eight healthy subjects walking with the adaptive gain proportional myoelectric controller with bilateral ankle exoskeletons. The adaptive gain was updated each stride such that on average the user’s peak muscle activity was mapped to maximal power output of the exoskeleton. All subjects participated in three identical training sessions where they walked on a treadmill for 50 minutes (30 minutes of which the exoskeleton was powered) at 1.2 ms-1. We calculated and analyzed metabolic energy consumption, muscle recruitment, inverse kinematics, inverse dynamics, and exoskeleton mechanics.ResultsUsing our controller, subjects achieved a metabolic reduction similar to that seen in previous work in about a third of the training time. The resulting controller gain was lower than that seen in previous work (β=1.50±0.14 versus a constant β=2). The adapted gain allowed users more total ankle joint power than that of unassisted walking, increasing ankle power in exchange for a decrease in hip power.ConclusionsOur findings indicate that humans prefer to walk with greater ankle mechanical power output than their unassisted gait when provided with an ankle exoskeleton using an adaptive controller. This suggests that robotic assistance from an exoskeleton can allow humans to adopt gait patterns different from their normal choices for locomotion. In our specific experiment, subjects increased ankle power and decreased hip power to walk with a reduction in metabolic cost. Future exoskeleton devices that rely on proportional myolectric control are likely to demonstrate improved performance by including an adaptive gain.Electronic supplementary materialThe online version of this article (doi:10.1186/s12984-015-0086-5) contains supplementary material, which is available to authorized users.

Highlights

  • Robotic ankle exoskeletons can provide assistance to users and reduce metabolic power during walking

  • Metabolic cost As subjects began to adapt to the exoskeleton, the amount of metabolic power required to walk in the device decreased (Fig. 3)

  • Subjects had a significant decrease in metabolic power in every session

Read more

Summary

Introduction

Robotic ankle exoskeletons can provide assistance to users and reduce metabolic power during walking. Our research group has investigated the use of proportional myoelectric control for controlling robotic ankle exoskeletons These controllers have relied on a constant gain to map user’s muscle activity to actuation control signals. In order to achieve optimal assistance, the controller of an active prosthetic or orthotic device must accomplish three tasks It must reliably determine the user’s intent, precisely coordinate the timing of assistance with the user, and provide actuation profiles of a suitable shape. Without direct access to the human nervous system, many lower-limb assistive robotic devices detect intent and timing from estimates of the user’s motion. These measurements are called mechanically intrinsic as they are taken from the mechanical device itself. It is impossible for the user to receive appropriate assistance for motion outside of the controller’s intent laws since all actuation profile shapes are predefined for specific movements

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call