Abstract
The learning control is applied to hybrid force and position control of robot manipulators. When the geometry and position of a constraint surface is known, the hybrid force and position controller and the feedforward compensator can be designed in the constraint coordinates. When the operation is periodic, the learning hybrid force and position control enhance the control performance as the feedforward compensator is updated in each cycle by the force and position error in the preceding trials. This scheme is proved to be asymptotically stable. A two degree of freedom SCARA-type direct-drive robot manipulator is used to test the learning hybrid force and position control. The deburring tool mounted on the upper link of the robot could follow a flat, tilted flat, and curved 1/4 aluminum plate with a desired contact force of 10 N (within the root-mean-square force error of 1.95 N) and with a desired tangential velocity. The experiments confirmed the effectiveness of the learning hybrid force and position controller. >
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
