Abstract
AbstractThe leaching of water-soluble plasticizers from polymeric films prepared by casting and drying of plasticized colloidal polymer dispersions was investigated with respect to the type and concentration of plasticizer (triethyl citrate or triacetin), film thickness, type of colloidal polymer dispersions (acrylic: Eudragit RS30D, RL30D, or L30D; cellulosic: Aquacoat), Eudragit RS30D/RL30D ratio, and method of film preparation (solvent- or pseudolatex-casting). The leaching increased with increasing level of plasticizer as indicated by an increase in the release rate constant while the release rate constant was independent of the film thickness. The leaching was more rapid from Aquacoat films than from Eudragit RS30D films at all plasticizer concentrations. Increasing the amount of the more hydrophilic polymer dispersion, Eudragit RL30D, in mixed Eudragit RS/RL films increased the rate of leaching. The incorporation of propranolol HCl into the polymeric films significantly increased the leaching rate c...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
