Abstract
A technique for leaching molybdenum from low-grade roasted molybdenite concentrate was proposed by the aqueous solution containing sodium chlorate and sodium carbonate. The effect of molar ratio of sodium chlorate to molybdenum, leaching time, liquid–solid ratio, leaching temperature, sodium carbonate concentration and agitating speed on leaching rate of molybdenum was studied. The experimental results showed that the temperature and concentration of sodium carbonate are key factors to influence the leaching efficiency of molybdenum, and leaching rate achieves above 98% when the molar ratio of sodium chlorate to molybdenum is up 13.5, the temperature is 343.15 K, the agitating speed is 500 rpm, the liquid–solid ratio is 10:1 and the concentration of sodium carbonate is above 10 g/L. The leaching process was mainly controlled by chemical reaction and mass transfer. The leaching time is shorter and the heavy metal content in leaching aqueous solution is lower in basicity than those in acid situations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
