Laser-based detection of methane and soot during entrained-flow biomass gasification

Abstract

Methane is one of the main gas species produced during biomass gasification and may be a desired or undesired product. Syngas CH4 concentrations are typically >5 vol-% (when desired) and 1–3 vol-% even when efforts are made to minimize it, while thermochemical equilibrium calculations (TEC) predict complete CH4 decomposition. How CH4 is generated and sustained in the reactor core is not well understood. To investigate this, accurate quantification of the CH4 concentration during the process is a necessary first step. We present results from rapid in situ measurements of CH4, soot volume fraction, H2O and gas temperature in the reactor core of an atmospheric entrained-flow biomass gasifier, obtained using tunable diode laser absorption spectroscopy (TDLAS) in the near-infrared (1.4 µm) and mid-infrared (3.1 µm) region. An 80/20 wt% mixture of forest residues and wheat straw was converted using oxygen-enriched air (O2>21 vol%) as oxidizer, while the global air-fuel equivalence ratio (AFR) was set to values between 0.3 and 0.7. Combustion at AFR 1.3 was performed as a reference. The results show that the CH4 concentration increased from 1 to 3 vol-% with decreasing AFR, and strongly correlated with soot production. In general, the TDLAS measurements are in good agreement with extractive diagnostics at the reactor outlet and TEC under fuel-lean conditions, but deviate significantly for lower AFR. Detailed 0D chemical reaction kinetics simulations suggest that the CH4 produced in the upper part of the reactor at temperatures >1700 K was fully decomposed, while the CH4 in the final syngas originated from the pyrolysis of fuel particles at temperatures below 1400 K in the lower section of the reactor core. It is shown that the process efficiency was significantly reduced due to the C and H atoms bound in methane and soot.