Abstract
The TC4/AlSi12 bimetallic structures (BS) with Nb interlayer transition were fabricated by laser additive manufacturing (LAM). The results showed that the TC4/AlSi12 BS with Nb interlayer prepared with optimized process parameters can be divided into three regions (the TC4 region, Nb region and the AlSi12 region) and two interfaces (the TC4/Nb interface and the Nb/AlSi12 interface). The high melting point (Ti, Nb) solid solution formed in the Nb region acted as a diffusion barrier between the TC4 alloy and the AlSi12 alloy, thereby effectively inhibiting the formation of Ti-Al intermetallic compounds (IMCs). With the decrease of the laser output power for AlSi12 deposition, the NbAl3 IMC changed from layered to dispersed distribution, while γ-TiAl and Ti5Si3 IMC disappeared, thus significantly reducing the crack susceptibility of the BS deposited layer. The tensile strength of TC4/AlSi12 BS with Nb interlayer was about 128MPa, and the fracture was located near the Nb/AlSi12 interface.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
